Reset to Factory Defaults Settings

Document LTP0101 rev 2.1f

You are here:

Reset to Factory Defaults Settings

NOTICE

Failure to heed the following may result in damage to equipment.

Using this option will reset ALL settings to their factory defaults including external controller settings and sensor calibrations. DO NOT perform this operation if unsure of site specific settings or how to reset them on the heat pump.

If a qualified technician is unavailable, please see "Contacting AquaCal AutoPilot, Inc." on page 1.

Simultaneously Press "Pool / Spa" button and "Up" button until the display shows 888.
Release buttons. Reset is complete.